1, the kitchen granite sink location should be reserved

In the first step, the kitchen granite sink is reserved, and the kitchen granite sink is roughly sized when ordering the kitchen granite sink. It is best to have a kitchen granite sink plan provided to avoid rework and lead to rework. When the kitchen granite sink is installed, the position reserved for the countertop should match the volume of the granite sink in the kitchen. The kitchen granite sink should be installed firmly and the tank should not be shaken from side to side. The installation of the kitchen granite sink is not a big project in the whole decoration, but pay attention to the sealing of the joints during the installation process.

2, first install the faucet and inlet pipe

In the second step, the faucet and inlet pipe should be installed before installing the kitchen granite sink. In addition, one end of the inlet pipe on the faucet is connected to the water inlet switch.

3, the kitchen granite sink is placed on the countertop

After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. The kitchen granite sink should be installed firmly and the tank should not be shaken from side to side. The installation of the kitchen granite sink is not a big project in the whole decoration, but pay attention to the sealing of the joints during the installation process.

4, overflow hole, filter basket seal

The degree of sealing of the overflow hole and the filter blue is affecting the use of the granite sink in the kitchen in the future. Therefore, the degree of sealing of the overflow hole and the filter blue is very important. After the installation is completed, it is necessary to check the sealing of the overflow hole and the filter basket.

5, install supporting hanging pieces

The final step of the installation is to install the matching granules of the kitchen granite sink. After the general kitchen granite sink is bought, the workers will cut the countertops according to the size of the kitchen granite sink. After placing the countertops, it is necessary to install the supporting hangs between the trough and the countertops. sheet. When installing, avoid small gaps and cause the tank to shake to better prevent leakage in the future.

6, drainage test, edge banding

After the installation is completed, a drainage test is carried out, the kitchen granite sink is filled with water, and the drainage of the sewage and the overflow hole is tested. If there is any water seepage when draining, rework immediately. After the drainage test, ensure that there is no problem, the kitchen granite sink can be sealed. When sealing with silicone, it is necessary to ensure that the gap between the kitchen granite sink and the countertop is even and there is no water seepage.

There are several problems in the process of installing the kitchen granite sink. Everyone needs to pay attention to it. Pay attention to the following problems to better avoid the bad phenomenon when using:

1, the kitchen granite sink is installed in the kitchen renovation

The installation of the kitchen granite sink should be left at the end of the kitchen renovation. The installation of the kitchen granite sink is not a big project. The kitchen granite sink needs to be prepared and installed, and the kitchen granite sink is directly prepared. Find an installer to install.

2. The water pipe must be drained during installation.

Before installing the kitchen granite sink, it is necessary to drain the water from the water pipe. If the water of the water pipe is not drained during installation, it will cause water leakage and rust in the kitchen granite sink in the future.

3, the faucet must be firm when installed

This point is very important for everyone to pay attention to, when installing the kitchen granite sink must pay attention to the firmness of the joint, but also pay attention to the location of the hot and cold water pipes, do not make a mistake. If the installation is not strong, there will be gaps near the granite sink in the kitchen, resulting in water leakage.

4, need to be cleaned after installation

After the installation is completed, the kitchen granite sink must be cleaned and the debris installed during the installation must be thoroughly rinsed. In addition, the smudges that can be seen in the granite sinks of daily kitchens can be treated like this. The kitchen granite sinks should be washed with warm water, washing liquid and soft cloth as much as possible after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are mild. Contamination should not be cleaned with a stronger detergent; foods that tend to contaminate kitchen granite sinks such as tea, coffee, juice, etc. should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the kitchen granite sink.