In fact, in the decoration process, it is best to understand a little more common sense of installation, such as how to install stainless steel sinks, what kind of problems should be noticed during the installation process, although it is not personally installed stainless steel sinks, but after understanding more, so better To check the decoration effect, the following Centry specifically describes the stainless steel sink installation method, stainless steel sink under the basin installation attention points.

Install kitchen sink under counter basin

First, the stainless steel sink installation method diagram

1. Reserve the sink position

Reserve a good sink and provide the approximate size of the sink when ordering the sink. It is best to have a floor plan provided to avoid rework and lead to rework. When the sink is installed, the position reserved for the countertop should match the volume of the sink. The sink should be installed firmly and the tank should not be shaken from side to side. The installation of the sink is not a big project in the whole decoration, but pay attention to the sealing of the joints during the installation process.

2, first install the faucet and inlet pipe

Install the faucet and inlet pipe before installing the sink. In addition, one end of the inlet pipe on the faucet is connected to the water inlet switch. For the installation of the specific sink faucet, please refer to the "Sink faucet installation, pull-type wash basin hot and cold water faucet installation steps."

3, the sink is placed on the marble countertop

After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. The sink should be installed firmly and the tank should not be shaken from side to side. The installation of the sink is not a big project in the whole decoration, but pay attention to the sealing of the joints during the installation process.

4, overflow hole, filter basket seal

The degree of sealing of the overflow hole and the filter blue is affecting the use of the sink in the future. Therefore, the degree of sealing of the overflow hole and the filter blue is very important. After the installation is completed, it is necessary to check the sealing of the overflow hole and the filter basket.

5, install supporting hanging pieces

The final step of the installation is to install the matching hanging piece of the sink. After the general sink is bought, the worker will cut the countertop of the cabinet according to the size of the sink. After placing the countertop, it is necessary to install a matching hanging piece between the trough and the countertop. When installing, avoid small gaps and cause the tank to shake to better prevent leakage in the future.Stainless steel sink installation method, stainless steel sink under counter basin installation attention points

6, drainage test, edge banding

After the installation is completed, a drainage test is carried out, the water tank is filled with water, and the drainage of the sewage water and the overflow hole is tested. If there is any water seepage when draining, rework immediately. After the drainage test, ensure that there is no problem, the sink can be sealed. When sealing with silicone, ensure that the gap between the sink and the table is even and there is no water seepage.

Second, stainless steel sink under counter basin installation attention points

1. The water pipe must be drained during installation. It is necessary to drain the water from the water pipe before installing the water tank. If the water of the water pipe is not drained during installation, it will cause leakage and rust in the water tank in the future.

2. It needs to be cleaned after installation. After the installation is completed, the sink must be cleaned and the debris during installation should be thoroughly cleaned. In addition, the stains that are easy to see in the daily sink can be treated like this. The sink should be cleaned with warm water, washing liquid and soft cloth after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are slightly polluted and should not be used. Use a strong detergent to clean; foods that easily contaminate the sink, such as tea, coffee, juice, etc., should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the sink.

3, stainless steel sink installation time in the kitchen renovation final installation, the installation of the sink is not a big project, the sink needs to be prepared in advance, ready to install, after the sink is completed, directly on the website to find the bathroom installation workers Just install it.